MX-6 (4g) CN
₹799.00
- 20% BETTER PERFORMANCE: With its improved composition, the ARCTIC MX-6 has a measurably lower thermal resistance than the MX-4
- PROVEN QUALITY: With over 20 years of experience in the PC cooling market, our focus was on improved performance, versatile application possibilities and an easy-to-use consistency RISK-FREE APPLICATION: MX-6 is neither electrically conductive nor capacitive. This eliminates the risk of short circuits or discharges
- VERSATILE APPLICATION: With its new composition, the MX-6 is suitable for many application scenarios. Thanks to its viscosity, it is also suitable for direct-die cooling scenarios for GPUs of graphics cards or console processors
- 100 % ORIGINAL DUE TO AUTHENTICITY CHECK: Due to our Authenticity Check, the authenticity of each individual product can be verified
,
Specification: MX-6 (4g) CN
|
13 reviews for MX-6 (4g) CN
Show all
Most Helpful
Highest Rating
Lowest Rating
Amod sharma –
Really works
Richard –
I put new paste in me and my wife’s PC every 8-12 months(during deep cleaning). This paste seriously goes above and beyond. 100% helps to keep the temps down even under heavy loads. I have a Strix ROG 3080ti with an Intel Core i9 11900K and a Lian Li 360 Galahad. I play Apex with all high settings, temps hold around 63-65 no issue. I use the Pea sized dot method
Varun bunny –
Woah top quality paste. It makes a huge difference repasting my gaming beast. Like after pasting the temperatures are around 50 to 60 degrees at full load which is impressive. the previous default was around 80 to 90 degrees. Its a great value for money, Although its just 4g it will be more than enough, I mistakenly ordered 2 lol.
Rohit –
Dropped to 40 from 65. Looks like it was perfect at the time of application. Maybe in a few months i will update this review to reveal the real performance
For now its very good and works.
jazzwilson –
MX-6 is better as it meets customer needs and requirements and its budget friendly too.
ahmedalhasssan –
Cette pâte thermique est certainement l’une des meilleures. Elle convient parfaitement à des CPU qui chauffent beaucoup.
martin jolicoeur –
Parfait
Amaljith.A –
This paste is magic. I built a SFF PC where temps are quite important. I was finding it particularly hard to cool the CPU an AMD 9600x. I had the best possible CPU cooler too for the small case I have. The temps weren’t that bad. The idle temps were between 62-70C which is not that high but also not as cool as I wanted. Without much expectations of lowering the temps further I purchased this paste to maybe give it a try. And voila!!!! The temps are down by a whopping 10 degrees. I had expected like a 1-3 degrees difference but this paste surpassed my expectations. No wonder it’s considered the best currently. Totally recommended.
Just one advice apply in a cross manner. It works better. It did for me atleast 🙂
Théo –
منتج رائع لكن توزيعه ع المعالج صعب
Harsh –
Très bon produit et très bonne marque, comme d’habitude. La pâte s’applique facilement, offre une excellente conductivité thermique, et les performances sont au rendez-vous. Rien à redire, ARCTIC reste une valeur sûre.
Amaljith.A –
I purchased arctic MX-6 on 2024 august and repasted my Laptop
|| Asus Rog strix g15 2021 model (G513QM-HQ403TS) – Ryzen 9 5900HX cpu and RTX 3060 gpu ||
I was using Coolermaster cryofuse violet it was initially good but after 6 months of use i got bad temps on my GPU like 87°C on die and 103°c on hotspot this happened even after locking the clock to 1850mhz and setting core clock offset to 150 mhz undervolt with the help of GHELPER.
Then i searched on internet for guidance which lead me to MX-6 and i am so happy with temps right after repasting my laptop gpu with mx-6 ( now i locked the gpu clock to 2100mhz with core clock offset to 150mhz undervolt ) now the RTX 3060 hovers around 75°C to 85°C on gpu die and 90°C on hotspot but it doesn’t throttle the clock or reduce the power always stays at 1950+ mhz with power draw averaging 112- 130 watts on fulll load which is mind blowing performance i am getting out of MX-6, I am so grateful to arctic for making this awsome close to perfect product i mean seriously while i was repasting i was so confused on how much to apply with x method and ended up using more and made a mess but even so the result came out great but could have been better if i took my time and applied correctly ” next time baby cos bought 4gm tube i think that will be enough for another 2 applications if it won’t dry out in 6 months i hope that won’t happen besides i am gonna use remaining mx 6 on my brother’s laptop which is asus tuf with i7 12700h and 4060, xd “
( please don’t be like me guys the proper method arctic recommend to use is dot or x application- Arctic have a official youtube channel and they uploaded a video showing the proper method to apply the M-6 Thermal paste)
Since my laptop came out of factory with pre applied liquid metal i decided to go with liquid metal for the CPU so i used leftover subzero M79 liquid metal thermal compound from my last repaste (unlike MX-6 or cryofuse ‘liquid metal’ is a very risky thermal compound don’t even think about using it if your laptop heatsink or cpu/gpu isn’t factory shipped with liquid metal and barriers to protect it), i myself gonna go with mx-6 on cpu next time lol anyway for the vram and vrm and chips i used 0.5 mm thickness Gelid gc extreme thermal pad 👍
Again Thank you Arctic for making such a good thermal paste ❤️🔥🙌
Sachin Chaurasia –
Costly for its price point
Levi Ackerman –
BEST THERMAL COMPOUND but its hell sticky and they don’t gives any spatula, i recommend using your credit/debit card to spread across on the cpu , but if you don’t want to get your card declined after that, use a god damnn spatula!! Spatula is not made of gold buy it from anywhere else!!