Thermal Grizzly Kryonaut, High Performance Thermal Paste for Cooling All Processors, Graphics Cards and Heat Sinks in Computers and Consoles -1.0 Gram
₹477.00
- Thermal Grizzly Kryonaut Thermal Grease Paste
- 1.0 Gram
- Grease Paste
,
Specification: Thermal Grizzly Kryonaut, High Performance Thermal Paste for Cooling All Processors, Graphics Cards and Heat Sinks in Computers and Consoles -1.0 Gram
|
13 reviews for Thermal Grizzly Kryonaut, High Performance Thermal Paste for Cooling All Processors, Graphics Cards and Heat Sinks in Computers and Consoles -1.0 Gram
Show all
Most Helpful
Highest Rating
Lowest Rating
Add a review
Related Products
Thermal Grizzly Kryonaut, High Performance Thermal Paste for Cooling All Processors, Graphics Cards and Heat Sinks in Computers and Consoles -1.0 Gram
₹477.00
Fabian –
Very nice product. My temps reduced substantially.
Ben –
nice product
Ankit –
The media could not be loaded.
Very good thermal paste or I can say the best when you can buy for your laptop. Just apply a very less the patient and you will get your performance boost. Please watch the video. I have talked everything about this and what I have problem I faced and what this solved.
101% vote to buy it, avoid others which comes cheaper than this
AvexAttacks –
Uit vele testen op YouTube bleek deze de beste te zijn, dat merk ik ook in mijn PC na wat benchmark testen.
Abbas Saify –
Exelente pasta térmica, fue para un Xbox y una laptop gamer de 90° bajo a 65° anexaría fotos pero ya no tengo la laptop xd, en mi Xbox sigue jalando bien, desventaja se acaba muy rápido ñ, si quieren tener más pasta compren una de 4gr
Rishi R. –
temp reduction is fine, i think you should buy a cheaper thing like cooler master Cryofuze 7 or any other like Noctua NT-H1 or NT-H2 because this is just 1g in 500 inr and it is really not enough for you cpu and gpu atleast it wasn’t for me, it is very thick and very hard to spread so when you spread it even with spatula its not spread easily, i read it online and i bought it thinking that i’m a pro but even for me it was very hard to spread when i tighten the nuts on my cpu after spreading it squeezes out from upon the cpu doesn’t sticks or stays, it was less and i had to buy it again i spent 1000 just for i time pasting low quantity , and temps are okayish you know not as good as they say…. so i think if its your first time, definitely don’t…. buy any other paste like MX-6 pro
Aman –
Good thermal paste
Luis A. –
Great thermal paste. I used this to replace the stock paste that came with water cooler and the temps are night and day in difference. I’m sure there’s more “better” paste out there but this does the job at a reasonable price.
Manoj R –
Really great earlier my gpu temp were reaching 74-75 degree with max usage and now it barely even goes above 68 and as for cpu it also has lower the temp, it brings down the temperature very fast.
Go for it, nice product
Arman miya –
Edit: after few days the temps got high again, I’ve applied the paste multiple times, but it doesn’t work, I’ve requested for replacement but no replacement nas been done and the false replacement claims are being made, idk how
I used to get 90-95 degree Celsius on my CPU when playing last of Us part 1 on my hp pavilion gaming laptop, after using some cheap thermal paste, I realized it’s no use, the temps were exactly the same, so I’ve decided to get this since I’ve seen a yt short saying this is the popular thermal paste and decided to buy this
My temps went from 90-95 before to 80-87 Degree Celsius while gaming (after applying this thermal paste)
the only problem is that it’s a little overpriced for it’s quantity
I had to apply the thermal paste twice because I messed up the first time, but quantity was already 50% completed lol
I think we can use this twice or three times with the given quantity (Keep in mind I’m on a laptop, which requires less quantity than Desktop)
Things to consider
* Before removing the heat sink of the laptop, disconnect the battery
* Take a picture of where the thermal pastes are applied, so that you can apply at the same places after cleaning the old one
* Use a clean lint free cloth to clean the old thermal paste and also use isopropyl alcohol on the cloth and rub off the old paste
* You can also use low percentage of isopropyl alcohol but will have to wait for it to dry off (I used 70% one, and no problems occurred)
* Use the drop method, where you apply peanut sized drop on the CPU and GPU and you place the heatsink on top of it, with a straight angle, it will spread itself evenly if kept right
Highly recommend this paste as it’s one time solution, and I’ve heard we don’t need to change the paste for another 2 years, The only thing is the quantity they send you is soo tiny amount lol
Kaushik Hanra –
„ – Die beste Wärmeleitpaste für Enthusiasten!“
Wärmeleistung – Spitzenklasse für Overclocking und High-Performance-Anwendungen
Die Thermal Grizzly Kryonaut ist für mich die beste Wärmeleitpaste, die ich bisher verwendet habe. Sie wird als hochleistungsfähige Paste für Overclocking und anspruchsvolle Anwendungen beworben – und genau das kann ich bestätigen. Nach dem Auftragen auf meine CPU (i7-13700K) und GPU (RTX 4090) konnte ich sofort eine deutliche Temperaturreduzierung feststellen.
Im direkten Vergleich zur vorher verwendeten Standard-Wärmeleitpaste zeigte sich, dass die Kryonaut die Temperaturen um bis zu 5-7°C senken konnte. Das macht sich besonders bei längerer Gaming- oder Rendering-Nutzung bemerkbar, wo die Temperatur nun viel stabiler bleibt. Wer also einen kühleren und effizienteren Betrieb seiner Hardware möchte, wird hier nicht enttäuscht.
Verarbeitung und Anwendung – Einfach und sauber
Die Konsistenz der Kryonaut-Paste ist ideal – sie ist weder zu flüssig noch zu zäh, sodass sie sich leicht auftragen lässt. Durch die mitgelieferte Spritze kann man sie präzise dosieren, was gerade bei kleinen Die-Flächen von GPUs ein großer Vorteil ist.
Im Gegensatz zu vielen anderen Pasten läuft sie nicht aus und bleibt dort, wo sie hingehört. Außerdem ist sie nicht elektrisch leitend, was zusätzliche Sicherheit bietet, falls doch mal ein Tropfen daneben gehen sollte. Wer einmal erlebt hat, wie leitfähige Pasten Probleme verursachen können, weiß diesen Punkt sehr zu schätzen.
Langlebigkeit – Hält lange ohne Austrocknen
Ein häufiges Problem bei vielen Wärmeleitpasten ist, dass sie nach einiger Zeit austrocknen und dadurch die Wärmeübertragung verschlechtern. Die Kryonaut-Paste hat jedoch eine besonders haltbare Zusammensetzung, die auch nach mehreren Monaten oder Jahren noch ihre volle Leistungsfähigkeit beibehält.
Ich habe sie nun schon in mehreren Systemen seit über einem Jahr im Einsatz, und die Temperaturen sind konstant niedrig, ohne dass ich erneut auftragen musste. Gerade für leistungsstarke Systeme oder Laptops, bei denen man die Wärmeleitpaste nicht ständig erneuern will, ist das ein riesiger Vorteil.
Fazit:
Die Thermal Grizzly Kryonaut überzeugt auf ganzer Linie: Sie bietet exzellente Wärmeleitfähigkeit, einfache Handhabung, lange Haltbarkeit und ist perfekt für High-End-PCs, Overclocking oder Gaming-Systeme.
Wer seine CPU oder GPU optimal kühlen und die maximale Leistung aus seiner Hardware herausholen will, sollte hier zugreifen. Der Preis mag etwas höher sein als bei Standardpasten, aber die Leistung rechtfertigt jeden Cent. Absolute Empfehlung für alle PC-Enthusiasten!
EHM –
Fans sounds smooth after placing it on heat shink. Value for money product.
Manoj R –
I was having trouble with my 5 Years old laptop. CPU & GPU temperature was rising to 80 – 85 C within a few min and with hardly any load, and while gaming 100 C in just a few min. Fan running at 100 % Also was of no help. Thermal throttling, FPS Drop, Inconsistent performance, etc. was very common.
I decided to replace the thermal paste, as Heatsink and Fan were already cleaned and the thermal paste was replaced a couple of years back.
Now the big task was to decide on the Thermal Paste. Arctic Silver MX4, Deep Cool Z3, Cooler Master Master Gel PRO, and Deep Cool G15 were a few products as an option along with Grizzly Kryonaut. Quantity was only 1 Gm. all other pastes were available at least 1.5 Gm or more. Due to the low quantity, the effective price was very high. Few even mentioned that it’s very little and insufficient for the job. I was sure that thermal paste is required just to fill the surface gap and just a thin layer. Hence decided to take a chance and ordered Grizzly Kryonaut.
Product delivered very next day. First I wanted to make sure it was a genuine product, hence straightaway headed to the manufacturer’s website and verified the code. Bingo! It’s verified as a genuine product.
Now the actual task of applying the fresh paste. Removed the Heatsink, surprisingly the old paste was not dry, it was very much greasy, So I was not expecting a huge difference with the new fresh paste. Carefully removed all the old paste from the CPU, GPU & Heatsink. and applied just enough on the CPU & GPU (just to form a thin layer) Installed the heating. I will use the remaining paste on Mac. I am sure the 1 Gm quantity is more than enough at least for two laptops.
Now the results.
Before replacing the thermal paste I had run a Cinebench test so I ran the Cinebench test after replacing the thermal paste. Below are the results.
Test Before After
Multi-Core Points 3238 4014
Single-Core Points 838 864
M P Ratio 3.87x 4.75x
Max Temperature 78 C 58 C (After running a few games for a couple of hrs.)
With the old paste and fan running at 100% Hardware Info was showing CPU Temp 100 C with just 5-10 min of gaming and there was Core Thermal Throttling.
With Grizzly Paste Maximum temperature is never over 80 C even after a couple of hours of gameplay and the Fan running at normal speed. And of course No Thermal Throttling.
The results are unbelievable. I wouldn’t have trusted this if I had not done it myself.
Application is also very important. So apply just enough not too much or not too less, it should be just enough.
Go for it! Highly recommended.