ARCTIC MX-4 – Thermal Compound Paste – Carbon Based High Performance – Heatsink Paste – Thermal Compound CPU for All Coolers – ACTCP00002B,Grey
₹524.00
- Scan the QR code of the product to check the authenticity.
- WELL PROVEN QUALITY: The design of our thermal paste packagings has changed several times, the formula of the composition has remained unchanged, so our MX pastes have stood for high quality
- HIGH PERFORMANCE: With excellent temperature reduction performance, the MX-4 is ideal for CPU and GPU cooling, and other applications between power semiconductor components and heatsinks
- SAFE APPLICATION: The MX-4 is metal-free and non-electrical conductive which eliminates any risks of causing short circuit, adding more protection to the CPU and VGA cards
- HIGH DURABILITY: In contrast to metal and silicon thermal compound, the MX-4 does not compromise over time. Once applied, you do not need to apply it again as it will last at least for 8 years
,
Specification: ARCTIC MX-4 – Thermal Compound Paste – Carbon Based High Performance – Heatsink Paste – Thermal Compound CPU for All Coolers – ACTCP00002B,Grey
|
13 reviews for ARCTIC MX-4 – Thermal Compound Paste – Carbon Based High Performance – Heatsink Paste – Thermal Compound CPU for All Coolers – ACTCP00002B,Grey
Show all
Most Helpful
Highest Rating
Lowest Rating
Add a review
Related Products
ARCTIC MX-4 – Thermal Compound Paste – Carbon Based High Performance – Heatsink Paste – Thermal Compound CPU for All Coolers – ACTCP00002B,Grey
₹524.00
Farzeen –
NOTE:My review is long but will surely help you out, please read before you buy!
This is the best thermal paste I have bought yet.
For laptop users, on idle, I do not think there will be that much of an temp drop, but if you see the maximum temperature and average temperature will be decreased by atleast 10-15 degrees (for my case)
I use Asus Vivobook 14 M509DA, it is a office laptop and cooling system along with heat sinks is very bad!
I had used a local thermal paste before and PLEASE DO NOT USE LOCAL THERMAL PASTE, IF YOU HAVE STUDIED SOLID MECHANICS AND FLUID MECHANICS IN PHYSICS, THERE ARE MULTIPLE PARAMETERS U NEED TO KEEP IN MIND BEFORE THERMAL PASTE, THAT IS:
1)is the thermal paste electrically conductive? (thermal pastes can be non conductive or conductive electrically, if they are then we need to be extra precautious while applying)
2)Thermal conductivity of the paste, (Very important, if thermal conductivity is above 13-15, its very good, in physical terms, the more the thermal conductivity, the faster and better the heat transfer from your cpu to the heatsink shall take place)
3)The viscosity of thermal paste. (Mid range viscosity / particle size we can say, shall be considered good, if its too viscous it will not be easy to apply and if its too liquid then it will dry up really quick)
Overall, I can say this thermal paste satisfies all the parameters I wrote above!
PC USERS can see a better result SURELY!, idle temperature.
And btw, as the decent temperature is now maintained, I can easily increase the tdp of my R5 3500U and get more performance at stable temperature!
As a laptop user, this is certified but pricey! You get just the thermal paste in a box, nothing else.
And hey also their is authencity check provided by ARTIC itself, because a lot of fake MX-4’s and MX-6’s are being sold online, so make sure you scan the qr code when it reaches to you. That’s all. GO.BUY!
Vikas Choudhary –
ARCTIC MX-4 is a high-quality thermal paste. With a tower CPU cooler, even under heavy stress, temperatures stay below 60°C.
Even with a basic cooler, it performs much better than cheap pastes. It helps maintain low temps and better system stability.
Safe, reliable, and effective — MX-4 is a great choice for any PC build.
Pratik –
This is the best thermal paste ever. The CPU idles at 30 degrees and barely reaches 55 when playing AAA games at max graphics settings. It is neither too thin nor too thick. I used it on my i5 14400F CPU and used the X pattern with 4 dots in open areas which is the best pattern to go for. You don’t need a spatula and spread it. Just go for it without a second thought.
Sarthak –
I got some of this a few months after purchasing a Dell XPS 9570 with 6 core i7. The CPU would hit about 83 Degrees C under high load on all cores and with GPU running hard. After re-pasting the CPU and GPU with this stuff, I no longer hit thermal throttling of any sort. Its a great product and re-pasting took minutes, literally. What I can say is you can take this a step further and add thermal pads to the VRM’s and under-volt (-190mV currently) and the system runs perfectly. Battery life when on light load has doubled, up to 9 hours with 80% screen brightness on “Better Performance” mode in Windows 10. A lot of this comes from the re-pasting with this thermal compound, I was under volting before and couldn’t achieve this level of thermal headroom! Great product, large amount in the tube and frankly you could probably do about 10 laptops with the amount you get.
Sarthak –
Uzun ömürlü ve oldukça iyi performans sunuyor.
Amazon Customer –
Ich habe mir die ARCTIC MX-4 zugelegt, um meinen Gaming-PC aufzurüsten, da die Temperaturen meiner CPU in letzter Zeit ziemlich hoch waren. Nach dem Auftragen bin ich von den Ergebnissen wirklich begeistert!
Das Auftragen war super einfach – selbst für jemanden, der nicht jeden Tag am PC schraubt, sollte es kein Problem darstellen. Die Konsistenz ist perfekt: nicht zu flüssig, nicht zu zäh. Es lässt sich gleichmäßig verteilen, ohne dass man Angst haben muss, etwas falsch zu machen.
Die Kühlleistung ist beeindruckend. Meine CPU läuft jetzt konstant 8–10 °C kühler als vorher, auch unter Last. Das macht sich besonders beim Gaming bemerkbar: Der Lüfter muss nicht mehr so hoch drehen und der ganze PC läuft deutlich ruhiger.
Preis-Leistung ist unschlagbar! Für den Preis bekommt man hier wirklich Premium-Qualität. Die 4g Tube reicht locker für mehrere Anwendungen. Habe gleich die Leitpaste bei meiner Verlobten getauscht und die Tube im Freundeskreis weitergereicht. (kleiner Tipp an dieser Stelle: alte Paste immer zuerst restlos entfernen! Am leichtesten geht es mit einem Mikrofasertuch und etwas Desinfektionsmittel – hier aber nicht übertreiben, es soll danach schließlich trocken sein, bevor man die neue Paste aufträgt)
Sicherheit ist wichtig – da die Paste nicht elektrisch leitend ist, muss man sich keine Sorgen um Kurzschlüsse machen.
Die Verpackung wirkt hochwertig und der Authenticity Check gibt zusätzliche Sicherheit, dass man auch wirklich das Original bekommt.
Fazit: Klare Kaufempfehlung! Ob für Standard-PCs oder Gaming-Rigs – die MX-4 macht ihren Job zuverlässig und effizient. Würde ich jederzeit wieder kaufen.
Radeshen M. –
Super pâte thermique, très efficace et super facile a poser.
Mise sur un processeur et une carte graphique, je recommande.
Farzeen –
I used Arctic MX-4 on my gaming PC, and I’m very satisfied with the performance. Temperatures dropped by 5–10°C compared to the old paste. It’s very easy to apply, and the texture spreads nicely. I also like that it’s non-conductive, so it’s safe even if a little extra spills out. No curing time needed — it works right away!
Great for both beginners and experienced users. Highly recommended for anyone looking for a quality and reliable thermal paste at a fair price.
Sachin –
Superb thermal paste, I am using this paste with i7 13700 and AG620 Cooler and the temps are below 78 degress even when benchmarking (cinebench, 3dmark).
Xontu –
Why did you pick this product vs others?:
affordable, tho i have one complain tho it takes a while for the paste to function. so dont expect temperature drops right after repasting it, conduct stress test for atleast an hour
Shakthi Prasad –
Good product for my laptop, dell latitude 5480 6th generation , temprature maintain 50 degree some time 62 but not going 70 or 80
Sachin –
Authenticity:
Authentic paste
Functionality:
Not dried up, worked how its is supposed to
Quantity:
Good enough
Tarun Kumar –
CPUとGPUの温度が下がりました。