pibox India, Raspberry Pi 4 Case 1Gb, 2GB, 4GB White red, Modular Design with Logo top screwless Design, Ports Access and for Raspberry Pi 4 Model…
₹298.00
- 【Raspberry Pi 4 Case 1Gb 2GB 4GB Black】Compatible with Pi 4 1GB, 2GB and 4GB – With unique removable top cover design, it can also be access to GPIO port, Chipset, Heatsink, camera slot and display slot
- 【5 Piece Design】Easy access to all ports and slots of the Pi.Heat sink openings for both CPU and LAN chip. Heat Vents with on bottom with Rubber feet
- 【Easy Install】It’s easy to install; The case consists of 5 parts and there is no need to screw the case, just cover them tightly. Its modular design also.
- 【Top Cover Easy Removal】With unique removable top cover design, it can also be access to GPIO port, camera slot and display slot;
- 【Excellent warranty】Raspberry PI 4 case powered by PiBOX India comes with 12 Months Manufacturer warranty as well as friendly email support.
,
Specification: pibox India, Raspberry Pi 4 Case 1Gb, 2GB, 4GB White red, Modular Design with Logo top screwless Design, Ports Access and for Raspberry Pi 4 Model…
|
6 reviews for pibox India, Raspberry Pi 4 Case 1Gb, 2GB, 4GB White red, Modular Design with Logo top screwless Design, Ports Access and for Raspberry Pi 4 Model…
Show all
Most Helpful
Highest Rating
Lowest Rating
Add a review
Related Products
pibox India, Raspberry Pi 4 Case 1Gb, 2GB, 4GB White red, Modular Design with Logo top screwless Design, Ports Access and for Raspberry Pi 4 Model…
₹298.00
Rajbala –
Very good product
Manaseej Kolay –
Very nice product, cost effective and solid build.
Jeetendar –
Sridhar Govindarajulu –
The case was delivered snapped together. It was easy to disassemble and install the Pi 4. The micro sd card slot is exposed, making it easy to change SD cards.
The plastic is reasonably good.
The cons are the Pi 4 runs warm. The case does not have any ventilation and so it keeps the Pi and enclosure warm even on light loads. It is advisable not to run all the 4 cores at 100% for long to avoid CPU thermal throttling.
The cover on GPIO side of the case can be removed to connect GPIO cables or dupont connectors to the GPIO, but unfortunately there is not enough clearance on the top of the case to route the cables through the open slot of the case on the side. The other option is to remove the top of the case to route the GPIO cables through the top. This again is a problem since the opening on top of the case is not aligned with the rows of GPIO pins. I am not sure if the plastic end of the dupont connectors I am using is big or is this normal. Maybe some who has used dupont connectors with this case can explain if this is a problem for them.
To make practical use of this case with the Pi 4, it is advisable to make a hole big enough for a low profile fan to be fitted firmly in the case. I have seen pictures of users having fitted a regular fan on the angled surface of the top of the case, which looks like a chimney or a drone.
But if you are not willing to spend more money on Rpi4 case, this can be it, and have to live with the cons.
The pros of this case is it is cheap compared to the competition and is also sleek, you can slip it in your pocket to take it around.
V Padma –
1. SD card can be accessed without opening the case
2. Two LEDs are visible from case
3. Properly fitting the RB pi 4
Cons: Fan should have been provided to avoid heating issue
Jeetendar –
Best rasberry pi4 case which allows to mount big fan over top, in my case I used pwm 60mm fan with risers just had to modify the case a little by cutting it, but worked great.