Rife Single Monitor Arm Mount Desk Height Adjustable Articulating Gas Spring Arm | Fits 19 21 24 27 29 30 32 Inch VESA Compatible Computer Screen…

Product description: ***** Received as described
Installation: **** Medium Efforts(easy)
Build quality : ***** Very Good

Value for money : *****(bought it for 6960 ₹)

Box contains:
✔️ 2 gas spring arms
✔️ Vesa mount pattern 75mm & 100mm
✔️ 1 base clamp
✔️ 1 base pillar
✔️ lots of screws and 2 Allen keys

The good:
➕ Easy gas spring adjustment
➕ Integrated cable management
➕ Dual installation options C clamp/grommet mount
➕ Dual motion full monitor
➕ Vesa pattern options 75mm/100mm

The bad:
➖ little bit costly (but have gas springs)

Assembly was fairly straight forward. I had it installed within 15 minutes.

First, take it out of the box, the arms are tied down with a tie wrap. As soon as you cut it, the arms will extend, so make sure that you hold the arm and the base is against something. There is a caution sticker attached with instructions.

The arms are sturdy and stay in place when I move the monitors. Their range of motion is also really impressive, allowing me to perfectly line up the two screens despite them being different brands. Also, the all-black construction looks so much better than a lot of other models.

The base itself was a lot bigger then I expected and did look a lot sturdier as it covered a wider surface area.

I used the clamp that however clamp was not able to accommodate the thickness of my desk so compensated with the chunks of boards.

I have 2x 25″ curve screens and 2x old 16″ flat screens. Vesa installation can be used but my monitors were not VESA compatible so I ordered non-VESA mount adapters to accommodate 16″ AOC old monitors. It worked like charm. Max screen size that arms could accommodate is 29″ weighing 8 kg each.

Rotation:
 • Arm joint attached to pillar = 135°
 • Mid arm joint = 180°
 • Vesa joint with arm = 90°
 • Vesa and monitor = 180°

Very impressed by the range of motion that I was able to get out of it and was easy to move with the gas springs.

Even gas spring tension can be adjusted according to your requirements.

Very solid, versatile, easy to assemble with clear directions, air-pistons fully functional and adjustable.

I was impressed with how much space I saved and how neat the whole thing looked!

All in all, I am totally happy with the item, the price, and the vendor. I would highly recommend it.

For me it does the job really well according to the price.

The product is definitely value for money but there are few things you should consider before you buy.

I have used both the single monitor arm and dual monitor arm, and this is a review for the dual monitor arm.
The single monitor arm (aluminum finish) is a more quality product but it is also more expensive and can only hold one monitor.

Now coming to the dual monitor arm. I would list down pros, cons and things to keep in mind.

Pros
– Cheap
– Sturdy
– Easy to assemble.
– Easily adjustable and configurable to your need.
– Two 23 inch monitors can easily fit and move.

Cons
– Monitor vibrates a litle when I type
– If you use larger monitors(25-27 inch) there won’t be much room to adjust, as they will take most of the width capacity.
– Compared to single arm monitor, the motion is not that smooth. Needs more effort to move.

Things to keep in mind
– If the edge of your table is too close to you, the possibilities of adjustments become limited. For example you may not be able to join the two monitors edge to edge.
– The farther away the point where you fix the arm to the table, the more room to adjust you’ll have. My table’s edge was bit close for my comfort, so I bought another single monitor arm. Then I fixed the two arms at far end which gave me lot of movement flexibi.
– Considering above first decide whether you should buy a dual monitor arm or two single monitor arms. I would recommended two single monitor arms if you want lot of freedom of movement.