Rpi shop Raspberry pi 4 case Model B Acrylic case with Fan + heatsink Included
₹261.00
- High quality Acrylic strong material case
- Fits perfectly to new Raspberry pi 4B model
- Package contents : Case (1 set), fan + mounting screws. Heat sink are NOT included with new price change.
- Fan included for cooling raspberry pi 5v
,
Specification: Rpi shop Raspberry pi 4 case Model B Acrylic case with Fan + heatsink Included
|
8 reviews for Rpi shop Raspberry pi 4 case Model B Acrylic case with Fan + heatsink Included
Show all
Most Helpful
Highest Rating
Lowest Rating
Add a review
Related Products
Rpi shop Raspberry pi 4 case Model B Acrylic case with Fan + heatsink Included
₹261.00
Updated Lucifer –
Fitting is little loose but it is nice case.
Saumit Dinesan –
Overall the product is good. The pieces fit properly and cover the raspberry pi 4 B properly.
Pros:
1. The transparent cover looks aesthetic.
2. The fan provided is good and will keep your system cool. You must put the wires property in GPIO pins, i.e. red on second and black on third pin on the external side.
3. Heat sinks also provided.
Cons:
1. In my case, the nuts were not provided with bolts, so I had to arrange them.
2. Also, the size of heat sink was not appropriate to cover RAM properly.
Mahir Chavda –
Recieved side panels which look EXACTLY the same.
Before buying I was really excited to get a DIY acrylic case because I appreciate building stuff usually from scratch rather than buying a prebuilt case. This product was an inbetween to the two since working with acrylic and building case on ur own can be quite difficult.
I got the product I started getting at it, peeled the brown paper very good it the adhesive wasn’t too sticky to leave of the glue and came of easily.
So like a jigsaw puzzle I started to piece together but even after an hour an half I couldn’t figure out so I started by joining the parts according to the io the top fan, the ethernet jack but then side panels looked EXACTLY the same.
How am I supposed to charge the raspberry pi when the port itself is blocked. And it wouldnt even fit tbh because the audio jack which pops beyond the card wouldn’t let you fix it.
So I will be drilling those parts for myself but gotta say this one mistake ruined it for me. Just buy a prebuilt case with fans and heat sink
Updated Lucifer –
The package is just awesome it was really great they also provided passive heatsink
My pi4 gone from 44 degree Celsius to 33
The fan quality and the case quality is also awesome but there are some mistakes in the design like you can’t access the display port without routing it inbetween the fan and heatsink also it is really hard to remove the SD card but you can do both if you remove the backplate
DrAjSingh –
The acrylic sheets are thick and well cut as per the requirement, the box fits well over the Pi board and all the connector cuts are perfectly aligned. Heat sinks are an additional advantage to keep ot cool. The Fan sits well, runs well and all my screws were well aligned. The Fan isn’t noisy as some have commented, maybe my fan is silent enough. The box is sturdy upon assembly and doesn’t wobble too much as its precut slots that lock upon side panels fixation. Please place the pi board inside and lid sheet in place before locking side panels. Overall Value for money.
Saumit Dinesan –
Case is fantastic and really useful. With this case i also got 2 heatsink with properly thermal pad attached to it.
Build quality is really great and it good if you are not planning to stick it on wall with case. Case can be easily assembled.
Fan + heatsink really making my raspberry cool and temp is near 30 degree C
Fan is pretty silent in case you don’t like fan noise.
Only one con Case build quality can be improved but case is already good enough for raspberry at this price point.
Hitanshu Sahu –
+ Case is easy to assemble
+ build quality great and precise cutting for slots and ports
+ provided with fan and heatsinks
+ All ports are accessible
+ For INR299/- this totally is a VALUE FOR MONEY!
Issues that you may live with
– SD Card cannot be removed easily (you’ll have to undo the case if you’ve to access the card)
– GPIO are not easily ‘plug and Play’. As a workaround you can use an extender or pre-plug your requirements.
– Fan doesn’t have a High RPM but that’s fine as long as it is flowing air there should not be any issues in cooling, PS: fan does not have GPIO connector so tweaking might be needed, I anyways wanted to power it externally and not overload the pi so that was a win-win situation for me.
Hitanshu Sahu –
I received something like a cardboard painted acrylic cover instead of the one like shown in the picture.
The Fan connector is NOT suitable for Raspberry Pi 5. It has an older thick connector that will only go in RaspPi4.
As a result, I had to cut the fan wires, solder some jumper cables and use the GPIO pins of RaspPi5 to make the fan work.
The heatsinks are good enough.
The power button is not pressable without a pin or something to insert from the case hole.
The LED view is a bit dim because of the cover. They did not bother to make a hole or remove the paint in front of the LED.
It looks like it was made for Rasp Pi 4 but they modified it to sell it for Pi 5 as well. Sort of, bro, you can copy the homework but don’t make it obvious kinda thing.
The case does the job. It protects. It cools. It indeed, is, value for money, kind of — but they could have done better.
Temperatures of Rasp Pi 5 (in Mumbai climate, summers) – with fan and heatsinks does not cross 65 degree C, which I think is great.